Uncruel and Usual Capital Punishment, Part Six

More from the Clark County (Indiana) prosecutor website:

HANGING

Procedure: Prior to any execution, the gallows area trap door and release mechanisms are inspected for proper operation. The rope, which is of manila hemp of at least 3/4"and not more than 1 1/4"in diameter and approximately 30 feet in length, is soaked and then stretched while drying to eliminate any spring, stiffness, or tendency to coil. The hangman's knot, which is tied pursuant to military regulations, is treated with wax, soap, or clear oil, to ensure that the rope slides smoothly through the knot. The end of the rope which does not contain the noose is tied to a grommet in the ceiling and then is tied off to a metal T-shaped bracket, which takes the force delivered by the offender's drop.

Additionally, prior to an execution, the condemned offender's file is reviewed to determine if there are any unusual characteristics the offender possesses that might warrant deviation from field instructions on hanging. A physical examination and measuring process is conducted to assure almost instant death and a minimum of bruising. If careful measuring and planning is not done, strangulation, obstructed blood flow, or beheading could result. At the appropriate time on execution day, the inmate, in restraints, is escorted to the gallows area and is placed standing over a hinged trap door from which the offender will be dropped. Following the offender's last statement, a hood is placed over the offender's head. Restraints are also applied. If the offender refuses to stand or cannot stand, he is placed on a collapse board. A determination of the proper amount of the drop of the condemned offender through the trap door is calculated using a standard military execution chart for hanging. The "drop" must be based on the prisoner's weight, to deliver 1260 foot_pounds of force to the neck. The noose is then placed snugly around the convict's neck, behind his or her left ear, which will cause the neck to snap. The trap door then opens, and the convict drops. If properly done, death is caused by dislocation of the third and fourth cervical vertebrae, or by asphyxiation. A button mechanically releases the trap door and escorts then move to the lower floor location to assist in the removal of the offender's body. (See Washington Execution Procedures).

History: Hanging is the oldest method of execution in the United States, but fell into disfavor in the 20th century after many botched attempts, and was replaced by electrocution as the most common method. There have been only 3 executions by hanging since 1977: Westley Dodd (WA 1993), Charles Campbell (WA 1994), and Billy Bailey (DE 1998).

Current Application: Only 3 states, Delaware, New Hampshire, and Washington, currently authorize hanging as a method of execution, all as an alternative to lethal injection, depending upon the choice of the inmate, whether injection is “impractical, or the possibility of lethal injection being held unconstitutional. As of July 1, 2006, 3 of 1,029 (0.3%) executions performed since 1976 have been by hanging.

[mrontemp business] | [mrontemp politics] | [mrontemp technology] | [mrontemp del.icio.us tags]

Sphere: Related Content